KOCENT OPTEC LIMITED
KOCENT OPTEC LIMITED Fiber Splitter, MPO Patch Cable, SC Fast Connector, ODVA/NSN/Fullaxs/ DLC Patch Cord, Fiber Terminal Box, Fiber Splice Closure, FTTH Cable, LC Attenuator, Polishing Machine.
Add to Cart
IEC Standard Ceramic Fiber Sleeve / Zirconia Sleeve For Fibers Optical Adapters
Descriptions:
- Zirconia, well known for its environment resistance and abration resistance, it is the key important materials for fiber optical network connection, especially for fiber optic adapter and attenuator.
- Ceramic sleeves (zirconia sleeve) are mostly used in Fiber optic adapter for the main purpose of connecting and aligning two inserted Ceramic Ferrules together.
Features:
Ceramic Split sleeves and Solid ceramic sleeves.
- Ceramic Split sleeves are to hold ferrules in place firmly and to enable a stable connection with Fiber optic connectors.
- Solid ceramic sleeves (precision sleeves) are often used for connecting optical modules.
- Moreover, the solid ceramic sleeve requires a more accurate inner diameter process than the Ceramic split sleeve.
Ceramic Split Sleeves and Phosphor Bronze Split Sleeves:
- Ceramic Split sleeves are used in Adapters and other fiber optic components for fiber alignment to get minimal insertion loss of the transmitted light signal.
- Phosphor Bronze Split Sleeves are an economical solution for applications where tremendous durability and repeated connect / disconnect operations are not required.
-Ceramic Splits sleeves and Phosphor Bronze Split Sleeves are categorized into two types used for ferrule outer diameters of 12.5mm and 2.5mm.
- They are used for connecting and aligning ferrules used with ST, FC, SC, LC and MU Fiber Connectors.
- LFO provides several kinds of ceramic split sleeves and Phosphor Bronze Split Sleeves with various -Ferrules pull force requirements for φ2.5mm OD Ferrules used for SC, FC and ST Fiber Adapters and for φ1.25mm OD Ferrules used for LC and MU Fiber Adapters.
- We also provide sleeves with special configurations, such as taped or chamfered in ends.
- Those configurations were uniquely designed to reduce the sleeve's broken rate and ferrule surface's abrasion when inserting the adapters into the sleeves.
- The configuration of products is greatly improved on the basis of considering requirements of pull-out force, insertion loss and length.
- Besides Standard singlemode and multimode ceramic sleeves for standard FC, ST, SC, LC, MU fiber adapter.
- We also offer custom manufacturing Non standard ceramic sleeves, both split and solid types of various length and O.D.
Package:
Specification:
| Type | Singlemode(PC) | Singlemode(APC) | Multimode (PC) |
| Insertion Loss | ≤0.2 dB | ||
| Plug and unplug force (g/f) | 200-600 | ||
| Durablity | plug and unplug 1000times | ||
| Operating Temperature | -40℃ to +75℃ | ||